Shown below is examples of some 2 day HN engineering courses, (fully accredited by a SQA HN credit) which have been delivered in the past. The course fee of £350.00/delegate (price based on 10 delegates) includes the registration fee with SQA, an A4 manual of well written professionally finished set of study notes on the subject material, marking of the 4 TMAs (Tutor marked assignments) and 2 day course attendance fee (lunch, teas included). For a less/greater number of delegates and if the course is in-house, the above cost is greatly reduced per delegate.
More Advanced (Honours degree level) and Specialised (Masters degree level) courses are also available and are also accredited by the appropriate University if the subject material falls within one of the existing B.Eng/MSc programmes.
Please inquire for more details on these types of advanced/specialised short courses stating the module or subject of interest and any specific needs and requirements of subject material for your company. In many cases, within a module, particular emphasis can be placed in specific specialised areas, if so desired to suit your company.
For a full breakdown of course content please link to, " Industrial Plant Maintenance ".
Day 1
09.00 Introduction to HN Industrial Plant Maintenance
09.15 Lecture 1: Maintenance Planning
10.15 Tea Break
10.30 lecture 2: Maintenance Organisation
11.30 Tutorial/Seminar - TMA No:1
12.30 Lunch
13.30 Lecture 3: Planning, control and programming of maintenance work
15.00 Tea Break
15.15 Tutorial/Seminar - TMA No:2
16.30 Submission of TMAs 1 and 2
17.00 End of Day 1
Day 2
09.00 Lecture 4: Maintenance Financing
10.15 Tea Break
10.30 lecture 5: Maintenance and its effect on the Health and Safety at Work Act, and the environment, and maintenance training
11.30 Tutorial/Seminar - TMA No: 3
12.30 Lunch
13.30 Lecture 6: Legal requirements of Maintenance
15.00 Tea Break
15.15 Tutorial/Seminar - TMA No: 4
16.30 Submission of TMAs 3and 4
17.00 End of Day 2
Fundamentals of Quality Assurance
For a full breakdown of course content please link to, " Fundamentals of Quality Assurance ".
Day 1
09.00 Introduction to HN Quality Assurance
09.15 Lecture 1: Principles of Quality Assurance I
10.15 Tea Break
10.30 lecture 2: Principles of Quality Assurance II
11.30 Tutorial/Seminar - TMA No:1
12.30 Lunch
13.30 Lecture 3: Quality Assurance in Design
15.00 Tea Break
15.15 Tutorial/Seminar - TMA No:2
16.30 Submission of TMAs 1 and 2
17.00 End of Day 1
Day 2
09.00 Lecture 4: Process Control
10.15 Tea Break
10.30 lecture 5: Process Inspection
11.30 Tutorial/Seminar - TMA No: 3
12.30 Lunch
13.30 Lecture 6: Summation of Quality Assurance
15.00 Tea Break
15.15 Tutorial/Seminar - TMA No: 4
16.30 Submission of TMAs 3and 4
17.00 End of Day 2
For a full breakdown of course content please link to, " Safety Engineering".
Day 1
09.00 Introduction to HN Safety Engineering
09.15 Lecture 1: The Character of Hazards
10.15 Tea Break
10.30 lecture 2: The Treatment of Hazards I
11.30 Tutorial/Seminar - TMA No:1
12.30 Lunch
13.30 Lecture 3: The Treatment of Hazards II
15.00 Tea Break
15.15 Tutorial/Seminar - TMA No:2
16.30 Submission of TMAs 1 and 2
17.00 End of Day 1
Day 2
09.00 Lecture 4: Applications of Protective Measures I
10.15 Tea Break
10.30 lecture 5: Applications of Protective Measures II
11.30 Tutorial/Seminar - TMA No: 3
12.30 Lunch
13.30 Lecture 6: Summation of Safety Engineering
15.00 Tea Break
15.15 Tutorial/Seminar - TMA No: 4
16.30 Submission of TMAs 3and 4
17.00 End of Day 2
For a full breakdown of course content please link to, " Plant Services ".
Day 1
09.00 Introduction to HN Plant Services
09.15 Lecture 1: Thermodynamic Properties of Steam
10.15 Tea Break
10.30 lecture 2: Thermodynamic Processes I
11.30 Tutorial/Seminar - TMA No:1
12.30 Lunch
13.30 Lecture 3: Thermodynamic Processes II
15.00 Tea Break
15.15 Tutorial/Seminar - TMA No:2
16.30 Submission of TMAs 1 and 2
17.00 End of Day 1
Day 2
09.00 Lecture 4: Servicing of Plant
10.15 Tea Break
10.30 lecture 5: Servicing Systems I
11.30 Tutorial/Seminar - TMA No: 3
12.30 Lunch
13.30 Lecture 6: Servicing Systems II
15.00 Tea Break
15.15 Tutorial/Seminar - TMA No: 4
16.30 Submission of TMAs 3and 4
17.00 End of Day 2
For a full breakdown of course content please link to, " Mechanical Plant Systems ".
Day 1
09.00 Introduction to HN Mechanical Plant Systems
09.15 Lecture 1: Compressors and Compressor Systems I
10.15 Tea Break
10.30 lecture 2: Compressors and Compressor Systems II
11.30 Tutorial/Seminar - TMA No:1
12.30 Lunch
13.30 Lecture 3: Internal Combustion Power Units I
15.00 Tea Break
15.15 Tutorial/Seminar - TMA No:2
16.30 Submission of TMAs 1 and 2
17.00 End of Day 1
Day 2
09.00 Lecture 4: Internal Combustion Power Units II
10.15 Tea Break
10.30 lecture 5: Valves and their uses
11.30 Tutorial/Seminar - TMA No: 3
12.30 Lunch
13.30 Lecture 6: Summation of Mechanical Plant Systems
15.00 Tea Break
15.15 Tutorial/Seminar - TMA No: 4
16.30 Submission of TMAs 3and 4
17.00 End of Day 2
For a full breakdown of course content please link to, " Electrical Plant (Machines) ".
Day 1
09.00 Introduction to HN Electrical Plant (Machines)
09.15 Lecture 1: DC Machines I
10.15 Tea Break
10.30 lecture 2: DC Machines II
11.30 Tutorial/Seminar - TMA No:1
12.30 Lunch
13.30 Lecture 3: The Mighty Motor
15.00 Tea Break
15.15 Tutorial/Seminar - TMA No:2
16.30 Submission of TMAs 1 and 2
17.00 End of Day 1
Day 2
09.00 Lecture 4: Three Phase Induction Motors
10.15 Tea Break
10.30 lecture 5: Synchronous Industrial Motors
11.30 Tutorial/Seminar - TMA No: 3
12.30 Lunch
13.30 Lecture 6: Transformers
15.00 Tea Break
15.15 Tutorial/Seminar - TMA No: 4
16.30 Submission of TMAs 3and 4
17.00 End of Day 2
For a full breakdown of course content please link to, " Electrical Plant (Protection) ".
Day 1
09.00 Introduction to HN Electrical Plant (Protection)
09.15 Lecture 1: Industrial Measurement
10.15 Tea Break
10.30 lecture 2: Parallel Operation of Units
11.30 Tutorial/Seminar - TMA No:1
12.30 Lunch
13.30 Lecture 3: Protection I
15.00 Tea Break
15.15 Tutorial/Seminar - TMA No:2
16.30 Submission of TMAs 1 and 2
17.00 End of Day 1
Day 2
09.00 Lecture 4: protection II
10.15 Tea Break
10.30 lecture 5: Earthing
11.30 Tutorial/Seminar - TMA No: 3
12.30 Lunch
13.30 Lecture 6: Summation of Electrical Plant (Protection)
15.00 Tea Break
15.15 Tutorial/Seminar - TMA No: 4
16.30 Submission of TMAs 3and 4
17.00 End of Day 2
Transmission of Measurement Signals
For a full breakdown of course content please link to, " Transmission of Measurement Signals ".
Day 1
09.00 Introduction to Transmission of Measurement Signals
09.15 Lecture 1: Pneumatic Transmission Systems
10.15 Tea Break
10.30 lecture 2: Electrical Transmission Systems I
11.30 Tutorial/Seminar - TMA No:1
12.30 Lunch
13.30 Lecture 3: Electrical Transmission Systems II
15.00 Tea Break
15.15 Tutorial/Seminar - TMA No:2
16.30 Submission of TMAs 1 and 2
17.00 End of Day 1
Day 2
09.00 Lecture 4: Modulation (AM, FM & PM)
10.15 Tea Break
10.30 lecture 5:Multiplexing
11.30 Tutorial/Seminar - TMA No: 3
12.30 Lunch
13.30 Lecture 6: Digital Transmission Systems
15.00 Tea Break
15.15 Tutorial/Seminar - TMA No: 4
16.30 Submission of TMAs 3and 4
17.00 End of Day 2