"Air Leak Detector"
EP 641
 
 

Extended Special Offer !!! - Only £349.00 (offer ends 30th September 2011)For any other currencies you may wish to use the universal currency converter.

The EP 641 ultrasonic air leak detector set is a "digital leak seeker" mainly used for the most basic general leak seeking applications within industrial plants, workshops, etc.

1 off EP641 - Digital detecting device
EP Plastic case

EP932 - Directional probes (accessory)

The EP641 ultrasonic air leak detector is used to find leaks (e.g. in industrial compressed air installations, gas installations, vacuum installations, in tanks, on car windows, etc).

   

Logis-Tech Associates are suppliers to many types of industries of reliable, easy to use, predictive, maintenance equipment of portable, fault locating, ultrasonic leak detection sensor sets.

The EP641 ultrasonic air leak detector makes use of a new developed digital technology, where the ultrasound (20 - 100 kHz) produced by e.g. a compressed air leak, transforms into a digital signal which the user sees and hears. The EP641 ultrasonic air leak detector responds by a flashing light and a pulsating sound. The faster the light flashes/the sound pulsates the closer you are to the leakage, and the speed of the light flashing/sound pulsating is also an expression of the size of the leakage (The faster the light flashing/sound pulsating - the bigger the leak).

If the need requires for a ultrasonic detector with a higher sensitivity than the EP641 ultrasonic air leak detector, we can also offer the troubleshooting ultrasonic products; the EP542A ultrasonic detector, EP2000 ultrasonic detector or the EP2400 ultrasonic detector. These latter ultrasonic leak detection sets are also able to find electrical (arcing and corona discharge) and mechanical malfunctions (worn bearings, worn gears, etc). These top of the range ultrasonic leak detector sets are in fact similar to two types of test instrumentation equipment combined within the one portable handheld kit.

The EP641 ultrasonic air leak detector can also be used with the EP512 ultrasonic transmitter that transmits pulsating ultrasonic. The transmitter is placed inside the item, e.g. a steel tank, that is then closed. The user can then examine the tank from the outside and can easily find leaks, if any, as a flashing light and a pulsating sound from the EP641 ultrasonic air leak detector.

Directional Probe(s) - {Accessory}:

In case of massive ultrasonic sounds in the surroundings, the 1-3 directional probes (3 x 19cm) can be applied to the sensor at the top of the EP641 ultrasonic air leak detection instrument and optimum listening-sensitivity is achieved - this is also useful for separation of close-set leakages - and for air leak detection at a distance.

Noise filled areas:

If the sound level exceeds 80 dB we recommend putting on an authorized and CE approved hearing protector before entering the area to be examined. The end user can in this situation read the flashing light, if the noise in the surroundings drowns the pulsating sound from the EP641 ultrasonic air leak detector.

Scopes of application:

Industrial plants, workshops, laboratories, hospitals, cars, train carriages, etc.

Accessory equipment:

EP 641 ultrasonic air leak detector can be used in combination with the EP 512 ultrasonic transmitter.

There is a 2 year warranty on all EP ultrasonic detectors.

Please refer to (i) our price list for our complete range of EP ultrasonic air leak detectors (ii) list of some of our satisfied customers or (iii) contact sales for any further assistance.

Company: Logis-Tech Associates
Address: 140 Boyd Street, Crosshill, Glasgow, G42 8TP, Scotland, UK
Tel No: + 44 (0) 141 423 6911