The EP 2000/EP 2400 ultrasonic detector
with calibration (0-35dB) is used to find leaks (e.g. in compressed
air installations, vacuum installations, in tanks, car windows etc,.)
It can also locate arcing and corona discharge in electrical systems
as well as to find mechanical malfunctions on movable parts (e.g.
ball bearings, gears, etc.).
The EP 2000/EP 2400 ultrasonic detector
equipment works by "listening" in a frequency band normally
containing no interference and non-audible for humans (> 20 kHz).
Leaking compressed air or electrical flashover (sparks) generates
e.g. ultrasonic. Audible noises from the surroundings are filtered
off so that the device can also be used in noisy areas.
If leaking a "buzz" can
be heard in the headphone. The sound level depends on the size of
the leak.
If looking for a very "small
minute " leak, the directional probe can be applied to the sensor
at the top of the instrument and optimum listening-sensitivity is
achieved. Make sure to seal all leaks found at the examination as
leakage costs money!
The EP 2000/EP 2400 ultrasonic detector
can also work as a "mechanical malfunction feeler" and picks
up interference from movable parts through a stethoscope or a clip.
The stethoscope only "listens" to low-frequency mechanical
vibrations so the stethoscope can also be used in noisy areas. It
is also possible to construct a permanent measure removal place e.g.
by a built-in piezoe component with a connection plug at a certain
machine part that is wished supervised so that the measuring can be
made as a pure reading task.
Please contact us for further details
on this!
The EP 2000/EP 2400
ultrasonic detector can also be used with the EP 512 ultrasonic transmitter
that transmits pulsating ultrasonic. The EP 512 transmitter is placed
inside an enclosure, e.g. a steel tank, that is then closed. The user
can then examine the tank from the outside perimeter and can easily
find leaks, if any, sounding like "pips" in the headphones.
Noise filled
areas:
EP 2000/EP 2400 ultrasonic
detector can be calibrated for room noise (0 - 35 dB)
The EP 2000/ EP 2400
ultrasonic detector equipment is used together with authorised and
CE approved EP 921 - hearing protector. So fulfilling the rules for
personal security in areas where the sound level can exceed 80 dB.
Scopes of application:
Industrial plants,
workshops, laboratories, hospital service, breweries, food manufacturers,
aeroplane industry etc,.
Examples of
application:
Leakage searching in
compressed air systems both at high and low pressure - also in extremely
noisy surroundings. Vacuum systems. Electric installations where flashovers
can be found - including insulators. Leakage searching in laboratory
glove boxes in combination with the EP 512 ultrasonic transmitter.
Mechanical transmission both instantly and permanently supervised.
Accessory equipment:
EP 2000/EP 2400 ultrasonic
detector can be combined with the EP 512 ultrasonic transmitter (range
27 m).
There is a 2 year warranty on all
EP ultrasonic detectors.
Please refer to (i) our price
list for our complete range of EP ultrasonic leak detectors (ii) list
of some of our satisfied customers
or (iii) contact sales for any further assistance.
Operating
Instructions of the EP2400
