Commercial
Training |
A-1 Technical Training, LOGIS-TECH ASSOCIATES deliver specialised courses to companies to suit their specific requirements. All courses are delivered by subject specialists. Please contact A-1 Technical Training, Logis-Tech Associates to discuss your specific needs and requirements.
Specific Modules delivered to a HN (Higher National) Level (and each can be accredited with a SQA HN award):
Application of Electrical & Electronic Instruments {DN48 33 - 1 credit} details Analogue Electronic Principles {DG2X 34 - 2 credits}
Combinational Logic {DG3C 34 - 1 credit}
Communication: Practical Skills {D77G 34 - 1 credit} details
Design for Manufacture { - 1 credit}
Dynamics {DT9T 34 - 1 credit} details
Economics of Manufacture {DT5R 34 - 1 credit}
Engineering Communication {DV9N 34 - 1 credit}
Engineering Drawing {DR1W 34 - 1 rcedit}
Engineering Measurement and System
Monitoring {DV9P 34 - 1 credit}Engineering Systems Analysis: Systems Modelling and Control { - 1 credit}
Engineering Systems Graded Unit 1 Examination {DW11 34 - 1 credit}
Engineering Principles {DR3L 34 - 1credit} details
Electrical Engineering Graded Unit 1 Examination {DN3V 34 - 1 credit}
Electrical Machine Principles {DN4J 34 - 2 credits} details
Electrical Networks and Resonance {DG3G 34 - 1 credit} details
Electrical Safety {DN4L 34 - 1 credit} detailsElectricity Power Systems {DN3W 34 - 1credit} details
Electronics Engineering Graded Unit 1 Examination {DG2T 34 - 1 credit}
Electronic Testing Skills {DG3N 34 - 1 credit}
Fundamentals of Control Systems and Transducers {DN3Y 34 - 1 credit} details
High Level Engineering Software [DG58 34 - 1 credit}
Materials Selection {DT46 34 - 1credit} details
Manufacturing Engineering Graded Unit 1 Examination {DV13 34 - 1 credit}
Mathematics for Engineering 1:
Electronics and Electrical {DG4H 33 - 1credit} detailsMathematics for Engineering 1:
Mechanical and Manufacturing{DT5X 33 - 1credit} detailsMathematics for Engineering 2 {DG4L 34 - 1 credit) details
Mechanical Engineering Graded Unit 1 Examination {Course code DV11 34 - 1 credit} details
Pneumatics and Hydraulics {DT9X 34 - 1 credit} details
Principles of Engineering Systems {DV9R 34 - 1 credit}
Principles of Safe Engineering - 1 credit}
Process and Equipment Selection {DT62 35 - 1 credit}
Project Management: - 1 credit}
Project Management: - 1 credit}
Quality Management: An Introduction {DT8Y 34 - 1 credit} details
Renewable Energy Systems: Overview of Energy Use {F1YL 34 - 2creditS}
Renewable Energy Systems: Technology {F1YN 35 - 2 creditS}
Renewable Energy Systems: Microgeneration Systems {F1YK 34 - 1 credit}
Renewable Energy Systems: Wind Power {F1YL 34 - 1 credit}
Sequential Logic {DG53 34 - 1 credit}
Single Phase A.C. Circuits {DG54 34 - 1 credit) details
Statics and Strength of Materials {DR1T 34 - 1 credit} details
Thermofluids {DT9P 34 - 1 credit} details
Three Phase Systems {DN47 34 - 1 credit} details
Typical examples of the 2 day HN programmes of several engineering courses can be viewed by linking to 2 day HN Engineering Courses, (fully accredited by a SQA HN credit) which have been delivered previously for companies at I.E.E. venues in Glasgow, Edinburgh and London.
For a greater number of delegates and if the course is in-house, the cost of these courses are greatly reduced per delegate.
More ADVANCED (Honours degree level)and SPECIALISED courses (Masters degree level) are also available and are also accredited by the appropriate University if the subject material falls within one of the existing B.Eng/MSc programmes.
Please inquire for more details on these types of advanced/specialised short courses stating the module or subject of interest and any specific needs and requirements of subject material for your company. In many cases, within a module, particular emphasis can be placed in specific specialised areas, if so desired to suit your company requirements.
Shown below is lists of (i) Advanced Courses, (ii) Specialised Courses and Miscellaneous Courses, which are all available to be delivered to-date.
******************************************************************************************************
The ADVANCED courses are delivered from an introductory level (pitched at first year degree) up to an advanced level (4th year Honours) and are listed in the table below.
- ENG ***:- Communications and the Internet: TCP/IP; Local Area Networks; FDDI; Fiber Optic Technology;
- Modems: Data Communications; RS232; Circuit and Packet switching;
- ENG ***:- Networks & Digital Communication: Satellite technology; Cellular Radio Telephony; GPS; Digital television; ISDN, Broadband, Nework Security, ATM and Frame relay;
- ENG ***:- Multimedia Networks: MPEG 1,2, 3, 4 -7; Videoconferencing; Satellite technology; Local Area Networks;
- ENG ***:- Microcomputer Systems: Number systems; CPU architecture; 68000 assembly language; Input/Output Interfaces/devices; Memory systems;
- ENG ***:- Electrical & Electronic Principles: Electromagnetism; Circuit networks, Single phase theory; Three phase systems;
- ENG ***/***:- Electrotechnology: Single phase theory; Combinational logic, Electromagnetism; 3 phase systems; 3 phase induction motors; Lecture 1
- ENG ***:- Analogue Electronics: Diodes; BJT Transistors; FET's;
- ENG ***:- Multimedia Technology: CPU architecture, Error correction/detection, Midi, Magnetic discs;
- ENG ***:- Audio Signal Processing: Filters; Operational amplifiers; Mini-disc; R-DAT; amplitude and frequency modulation;
***********************************************************************
The SPECIALISED courses (pitched at Masters degree level) are ALL the modules within the 5 Masters degree progammes, which A-1 Technical Training, Logis-Tech Associates support.
***********************************************************************
- Computing for the Terrified
- European Computing Driving Licence